Service · OhMyGlass Window and Door Repairs

Aluminum Storefront Glass Repair & Installation Toronto & GTA

Aluminum storefront glass repair and installation in Toronto & GTA. Narrow, medium, and wide stile systems. Thermally broken options. Fast, professional service.

24/7 Main line
647-803-2730
After hours
437-525-1255
Loading form…
SAFETY · FIRST STEPS

What to do while you wait.

The first few minutes after a window or door glass break are critical for safety. Follow these steps while you wait for our team to arrive.
STEP · 01
Clear the area

Keep children, pets, and anyone without proper footwear away from the broken glass. Shards can scatter several feet from the break point.

STEP · 02
Don’t touch attached glass

Glass still attached to the frame can fall without warning and cause deep cuts. Leave loose pieces alone until our technician arrives.

STEP · 03
Wear shoes and gloves

If you must walk near the area, wear closed-toe shoes and work gloves. Thin slippers or bare feet are a serious hazard.

STEP · 04
Cover the opening

Use a heavy tarp, thick cardboard, or plastic sheeting secured with tape to block wind, rain, and debris until we arrive.

STEP · 05
Photograph the damage

Take photos of the damage from both inside and outside. These help our technician prepare the right glass size and type before arriving.

STEP · 06
Call OhMyGlass Window and Door Repairs

Call 647-803-2730. Our emergency line is staffed 24/7 including nights, weekends, and holidays.

SERVICE · OVERVIEW

Overview

 

Aluminum storefront systems are the backbone of commercial glass facades across the Greater Toronto Area. They combine structural strength, clean sightlines, and weather resistance in a lightweight, low-maintenance package. OhMyGlass Window and Door Repairs repairs and installs aluminum storefront glass for businesses of all sizes - from a single replacement pane in an existing frame to a complete new storefront system. We work with all major framing profiles including narrow stile, medium stile, and wide stile configurations, and offer both thermally broken and non-thermally broken options to suit your building's energy and budget requirements.

DETAIL · 03

Types of Aluminum Storefront Systems

 

Aluminum storefront framing comes in several standard profiles, each designed for different traffic levels and hardware requirements.

01
Narrow stile

vertical stiles of 1-3/4 to 2-1/8 inches. Designed for light to moderate traffic locations such as office lobbies and strip mall entrances. Provides maximum glass area and minimal frame visibility.

02
Medium stile

vertical stiles of 3-1/2 inches. Suited for moderate to heavy traffic in retail stores, restaurants, and medical offices. Balances glass visibility with structural strength.

03
Wide stile

vertical stiles of 5 inches. Built for heavy traffic in public buildings, schools, and transit facilities. Accommodates panic hardware, closers, and a wider variety of operating hardware.

04
Thermally broken systems

framing that includes an insulating barrier (typically a polyamide strip) between the interior and exterior aluminum to reduce heat transfer through the frame. Required in many new builds for energy code compliance.

05
Non-thermally broken systems

standard aluminum framing without an insulating break. Common in older buildings and non-conditioned spaces.

DETAIL · 04

Glass Options for Aluminum Storefronts

 

Aluminum storefront frames accommodate a wide range of glass types and thicknesses, from single panes to insulated glass units.

01
Standard clear tempered glass

the most common choice for commercial storefronts, meeting Ontario Building Code safety requirements.

02
Laminated safety glass

provides enhanced security and holds together when broken, making forced entry more difficult.

03
Insulated glass units (IGUs)

double-pane units with an air or argon cavity for improved thermal and acoustic performance.

04
Tinted and Low-E coated glass

reduces solar heat gain, glare, and UV transmission while maintaining outward visibility.

05
Spandrel glass

opaque, coated glass used between vision panels to conceal floor slabs, structural members, and mechanical systems.

DETAIL · 05

Our Installation and Repair Process

 

Whether you need a single pane replaced in an existing aluminum frame or a complete new storefront system installed, our process is consistent and professional.

01
Site survey
we measure the opening, identify the existing framing profile (manufacturer, series, finish), and note any code requirements.
02
Material sourcing
glass is fabricated or sourced to the exact size and specification. For frame repairs, we match the existing aluminum profile and finish.
03
Glazing
glass is dry-glazed into the frame using EPDM gaskets on both interior and exterior faces, providing a weather-tight seal without wet sealants.
04
Hardware and finishing
door hardware, closers, locks, and threshold components are installed or replaced as needed.
05
Final inspection
we verify the seal, alignment, and operation of all doors and panels before completing the job.
DETAIL · 06

Why Choose Aluminum Framing for Your Storefront?

 

Aluminum is the dominant framing material for commercial storefronts for several practical reasons.

01
Durability

extruded 6063-T5 aluminum alloy resists corrosion, warping, and rot, even in Ontario's freeze-thaw climate.

02
Lightweight

aluminum weighs about one-third as much as steel, reducing structural load on the building and simplifying installation.

03
Low maintenance

anodized or powder-coated finishes hold up for decades without painting or staining.

04
Design flexibility

aluminum extrusions can be manufactured in a wide range of profiles, finishes, and colours to match any architectural style.

05
Recyclability

aluminum is one of the most recyclable building materials, with no loss of quality when reprocessed.

FAQ · QUICK ANSWERS

Frequently asked questions: Aluminum storefront glass

 

Commercial storefront repair and installation across Toronto and the GTA.

How quickly can you respond to a damaged storefront?

We prioritize commercial openings - dispatch targets 30–60 minutes for many emergencies across the GTA depending on crew routing.

Do you match existing aluminum frame profiles and finishes?

Yes. Our site survey records manufacturer, series, and finish so replacement glass and frame repairs match the opening.

Do you provide written quotes before ordering glass?

Yes. We confirm scope, safety glass requirements, and pricing before fabrication or installation.

Can you install thermally broken storefront systems for energy code compliance?

Yes. We offer thermally broken and non-thermally broken extrusions to meet project and code requirements.

Ready for a free quote?

Call 647-803-2730 for 24/7 dispatch or request service online. We respond quickly across the GTA.

Call 24/7